 |
High Temperature
Thermocouple Connector 2 Pole
- Glass filled thermoset body provides for use at temperatures to 800°F (425°C) continuous and 1000°:F (540°C) intermittent.
- Heavy duty hollow pin construction prevents reverse mating of polarity.*
- Body color red to indicate High Temperature.
- Calibration and polarity indicated by symbols molded into body.
- Contacts made of thermocouple materials which meet ISA and ANSI standards.
- Jack spring loaded to ensure firm grip to plug.
- Accepts wire sizes to 14 awg.
- Provided with wire channel and large head screws for positive connection.
- Accepts crimp sizes to 1/4" and tube adapters to 3/8".
- Finger grips to permit ease of connection.
*Solid pin available on above construction.
|
|
 |
Jab In Style High Temperature
Thermocouple Connector 2 Pole
- Glass filled thermoset body provides for use at temperatures to 800°F (425°C) continuous and 1000°:F (540°C) intermittent.
- Heavy duty hollow pin construction prevents reverse mating of polarity.*
- Body color red to indicate High Temperature.
- Calibration and polarity indicated by symbols molded into body.
- Contacts made of thermocouple materials which meet ISA and ANSI standards.
- Jack spring loaded to ensure firm grip to plug.
- Accepts wire sizes from 20 awg to 14 awg.
- Provided with wire channel and large head screws for positive connection.
- Finger grips to permit ease of connection.
- May be used with wire clamp bracket or compression tube adapter.
|
|
 |
- Thermoplastic body provides high strength at temperatures up to 425°F (218°C) as well as low moisture absorption and good dielectric constant.
- Small, light weight and space saving.
- Body color coded to ISA and ANSI standards.
- Polarity indicated by symbols molded into body.
- Contacts made of thermocouple materials which meet ISA and ANSI standards.
- Jack spring loaded to ensure firm grip to plug.
- Accepts crimp adapter for product from .020 to .125.
- Finger grips to permit ease of connection.
- 10" ID center mounting hole.
|
|
 |
Miniature Brass Crimp
- Used to crimp or braze sheath type thermocouples.
- Hex allows for best orientation of wires when inserted in the connector body.
Miniature Rubber Bushing
- Installed into insert indentation of mini connectors.
- Provides strain relief for insulated wire.
Miniature Wire Clamp
- Provides support for insulated leads to eliminate mechanical damage to leads at the connector.
- Easily installed with single screw through center mounting hole, allowing easy access to terminals.
|
